MicroMax® SRM 100, Soil pH & Resistivity Total System
Product Code: 826791-300
Speed groundbed installations by using the SRM100 to spend less time setting up measurement equipment and more time digging. It lets you measure soil resistivity and pH simultaneously in less than 2 minutes and its single-probe configuration eliminates errors due to miscalulations or incorrect probe spacing and depth.
Choose from three probe options
Each SRM100 comes with one or more probes. You can choose to include a short (bell hole) probe, a long (subsurface) probe, or both.Trust your readings
Digital circuitry allows for repeatable readings with improved accuracy, and the unit's two-line display is easy to read in most light conditions.Protect your investment
No matter which probe configuration you choose, your SRM100 and probe(s) will be housed in a crush-proof, water-resistant case for protection from the elements.- Quantity Available: 0
- Availability: Discontinued
SRM100 Soil Resistivity and pH Meter
| Dimensions | 7.5 x 4.75 x 2.25 in. |
| Weight | 2.5 lbs. without probe(s) |
| Construction / Environmental Protection |
ABS high-impact plastic, corrosion proof, sealed to NEMA4/IP64 |
| Resistivity Range |
0 to 1.5M ohm-cm |
| Resistivity Accuracy |
± 5% of the reading |
| pH Range |
3 to 10 standard units |
| pH Accuracy |
± 0.5 standard units |
| Display | Liquid crystal, 2 lines of 16 characters |
| Switches | NEMA4/IP64 sealed toggle switches |
| Power Supply |
4 AA alkaline batteries (provide approximately 100 hours of continuous operation) |
| Ambient Operating Temperature / Humidity |
-15 to 60° C, 0 to 100% non-condensing |
Probes
| Short Probe |
Bell-Hole Probe. T-handle 12 inches by 5/8-inch diameter shaft of carbon
steel construction with ¾-inch diameter measurement
sensor for pH and resistivity; probe wire with coiled cable for
direct connection to soil probe meter |
| Long Probe |
Subsurface Probe. T-handle 40 inches by 5/8-inch diameter shaft of carbon
steel construction with ¾-inch diameter measurement
sensor for pH and resistivity; probe with cradle for direct
connection to soil meter |
Protective Case
| Case |
Watertight, crush proof, and dust proof with easy-open,
double-throw latches, open-cell core with solid-wall design,
O-ring seal, fold-down handles, stainless steel hardware and
padlock protectors |
| Outside Dimensions | 53 x 16 x 6 ¼ inches |
| Lid and Back |
Double-walled construction for added crush resistance |
| Weight |
20 pounds without soil probe meter, bell hole probe,
subsurface probe and accessories |
| Inside Case |
Fitted with 2.2 lb. density polyethylene foam |
Foam insert is molded to fit the soil probe meter, bell hole and subsurface
probes, maintenance kit and soil probe meter manual |